2004 Ford Ranger
Mileage
123,385
Service Date
1/7/2021
Services Performed
- BALL JOINT – Remove & Replace – RWD Lower,Both Sides – [DOES NOT include wheel alignment.] – [DOES NOT include alignment.]
- BLOWER MOTOR RESISTOR – Remove & Replace – All Applicable Models
- Change engine oil using vehicle specific oil, and oil filter
- MUFFLER – Remove & Replace – V6,3.0L Eng
- RACK & PINION BOOT – Remove & Replace – Both
- Service air conditioner. Check condition of all belts and lines. Evacuate and recharge with reclaimed R-134. Test system performance.
- SHOCK &/OR STRUT ASSEMBLY – Remove & Install or Remove & Replace – Both – [DOES NOT include disassemble or alignment.]
- VALVE COVER GASKET – Remove & Replace – V6,3.0L Eng Both – [Includes: R&I Upper Intake Manifold Gasket.]
- Vehicle was low on coolant, checked system for leaks and found none. Vehicle is losing coolant because the radiator cap is weak and not holding pressure. Need the blower motor resistor replace to be able to change the air blowing settings. Found no leaks in the A/C system. Just needs to be recharged. The rack and pinion bellows are rotting out and the replaced, the rubber is deteriorating. The lower ball joints are deteriorating as well and need replaced. Muffler is rusted through, has a hole in it and needs replaced.
- Four Wheel Alignment
John K. gave our service a 5 star review on 1/16/2021
