Call (317) 441-4132

Go to…

Ford

Home / Ford / Page 5

We Service and Repair all Ford cars

  • 2006 Ford Pickup

    Ford Pickup
    Mileage
    155,908
    Service Date
    6/11/2020
    Services Performed
    • CENTER SUPPORT BEARING – Remove & Replace – All Applicable Models
    • Remove and reinstall four wheels and rear brake drums (if applicable) to inspect brake condition. Inspect entire system for leaks. Lining remaining is: Front ( mm) Rear ( mm)
    • STEERING GEAR (COMPLETE) – Remove & Install or Remove & Replace – F250 Super Duty,F350 Super Duty,Diesel,4WD – [Includes: Adjust toe-in on Rack and Pinion type Steering Gears. NOTE: Deduct .4 if alignment is also performed. DOES NOT include transfer of co
    • Four Wheel Alignment
     
    Chris T. gave our service a 5 star review on 6/11/2020

  • 2013 Ford Taurus

    Ford Taurus
    Mileage
    141,087
    Service Date
    5/21/2020
    Services Performed
    • WATER PUMP – Remove & Replace – V6,Normally Aspirated – [Includes: R&I Camshaft Drive Chain.]
    • Water pump is leaking and needs replaced. Water pump is internal, must take off the timing chains to remove pump. Will replace timing chains while replacing pump.
     
    Alexandra D. gave our service a 5 star review on 5/21/2020

  • 2010 Ford Escape

    Ford Escape
    Mileage
    156,454
    Service Date
    5/5/2020
    Services Performed
    • CALIPER – Remove & Replace – Front,Both – [Includes: Bleed System and replace Pads (if necessary).]
    • Vehicle is rattling and wont accelerate, has a burning smell. Diagnose – Front brake calipers are binding when hot, hoses are old and collapsed internally, engine is put under extra load when driving as the calipers will not let the brakes release. Extra load is causing vibration, possible burning smell from extra load. Binding calipers are causing burning smell and vibration. Needs front calipers and hoses replaced.
     
    Marcy G. gave our service a 5 star review on 5/5/2020

  • 2012 Ford Focus

    Ford Focus
    Mileage
    176,083
    Service Date
    3/31/2020
    Services Performed
    • All heat shields were loose, causing loud rattling. Secured all loose shields and rattling is gone. Engine code P0131, Oxygen sensor circuits are low, sensors are sticking. Both upstream and downstream need replaced.
    • OXYGEN SENSOR – Remove & Replace – Normally Aspirated Bank 1 Sensor 1 Upstream – [Includes: Component test.]
     
    Kevin Y. gave our service a 5 star review on 4/1/2020

  • 2010 Ford Pickup

    Ford Pickup
    Mileage
    205,909
    Service Date
    1/29/2020
    Services Performed
    • Tread is low on all tries, fronts are dangerously low. Needs new tires and four wheel alignment
     
    Brett F. gave our service a 5 star review on 1/29/2020

  • 2015 Ford Fusion

    Ford Fusion
    Mileage
    67,688
    Service Date
    11/13/2019
    Services Performed
    • WHEEL BEARING – Remove & Replace – Front,One – [Serviced as Wheel Hub Assembly.] – [Includes: Replace Bearings and repack.]
     
    James F. gave our service a 5 star review on 11/13/2019

  • 2016 Ford Edge

    Ford Edge
    Mileage
    38,886
    Service Date
    9/20/2019
    Services Performed
    • Change engine oil using full synthetic oil and vehicle-specific oil filter.
    • Remove tires to rotate and balance to appropriate weight distribution.
     
    Pam H. gave our service a 5 star review on 9/20/2019

  • 2010 Ford Escape

    Ford Escape
    Mileage
    151,891
    Service Date
    9/19/2019
    Services Performed
    • Change engine oil using synthetic blend oil and vehicle-specific oil filter.
    • IGNITION LOCK CYLINDER – Remove & Replace – All Applicable Models
     
    Marcy G. gave our service a 5 star review on 9/19/2019

  • 2010 Ford Flex

    Ford Flex
    Mileage
    172,368
    Service Date
    9/12/2019
    Services Performed
    • (Additional) – STEERING GEAR (COMPLETE) – Remove & Install or Remove & Replace If necessary to Bleed System add
    • (Combination) – TIE ROD &/OR END – Replace Each
    • Power steering leak, steering feels tight, difficult to turn – Diagnoses – Inner seals have broken on the Rack and Pinion. Needs replaced. May have caused damage to power steering pump
    • STEERING GEAR (COMPLETE) – Remove & Install or Remove & Replace – All Applicable Models – [Includes: Adjust toe-in on Rack and Pinion type Steering Gears. NOTE: Deduct .4 if alignment is also performed. DOES NOT include transfer of components.]
     
    Corey R. gave our service a 5 star review on 9/12/2019